EasyManua.ls Logo

Toro Workman 2100 - Service and Repairs: Oil and Filters

Toro Workman 2100
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Figure 19
Figure 20
Figure 21
Air Cleaner
Service Interval/Specification
Check the air cleaner body for damage that could
possibly cause an air leak. Replace a damaged air
cleaner body.
Ensure the cover is sealing around the air cleaner
body.
Air Cleaner Filter: Inspect after every 100 operating
hours; replace after every 200 hours or sooner if dirty
or damaged.
Note: Service the air cleaner more frequently (every
few hours) if operating are extremely dusty or sandy.
Removing the Filter Element
1. Park the machine on a level surface and turn the
engine off.
2. Raise the bed and secure it with a prop rod.
3. Release the latches securing the air cleaner cover
to the air cleaner body. Separate the cover from
the body. Clean the inside of the air cleaner
cover (Fig. 22).
Figure 22
1. Air cleaner latches
2. Cover
3. Filter
Maintenance
– 27

Table of Contents

Other manuals for Toro Workman 2100

Related product manuals