Toro Z Master 74925TE - Changing the Engine Oil

To Next Page

To Previous Page

G008792

Figure49

ChangingtheEngineOil

ServiceInterval:Aftertherst8hours

Every100hours(moreoftenindirty

ordustyconditions)

Note:Disposeoftheusedoilatarecyclingcenter.

1.Starttheengineandletitrunveminutes.This

warmstheoilsoitdrainsbetter.

2.Parkthemachinesothattherearisslightlylower

thanthefronttoensuretheoildrainscompletely.

3.DisengagethePTO,movethemotioncontrollevers

totheneutrallockedpositionandsettheparking

brake.

4.Stoptheengine,removethekey,andwaitforall

movingpartstostopbeforeleavingtheoperating

position(

Figure50).

G008793

Figure50

Main Page

Side Discharge1
Table of Contents2
Introduction2
Safety4
- Safe Operating Practices4
- Toro Riding Mower Safety5
- Sound Pressure6
- Sound Power6
- Vibration Level6
- Slope Indicator7
- Safety and Instructional Decals8
Product Overview14
- Controls14
- Specifications15
Operation16
- Adding Fuel16
- Checking the Engine Oil Level17
- Breaking in a New Machine17
- Using the Rollover Protection System (ROPS)17
- Think Safety First18
- Operating the Parking Brake19
- Operating the Mower Blade Control Switch (PTO)19
- Operating the Throttle20
- Operating the Choke20
- Operating the Ignition Switch20
- Using the Fuel Shut-Off Valve20
- Starting and Stopping the Engine21
- The Safety Interlock System22
- Driving Forward or Backward23
- Stopping the Machine24
- Adjusting the Height of Cut24
- Adjusting the Anti-Scalp Rollers25
- Adjusting the Flow Baffle Cam Locks26
- Positioning the Flow Baffle27
- Positioning the Seat27
- Using the Drive Wheel Release Valves28
- Using the Side Discharge28
- Transporting Machines29
- Loading Machines29
- Using the Z Stand30
- Operating Tips31
- Blade Maintenance32
Maintenance33
Recommended Maintenance Schedule(S)33
Lubrication34
- Greasing and Lubrication34
- Where to Grease the Mower34
- Lubricate Caster Wheel Hubs35
Engine Maintenance36
- Servicing the Air Cleaner36
- Servicing the Engine Oil37
  - Changing the Engine Oil38
  - Changing the Engine Oil Filter39
- Servicing the Spark Plug40
- Check Spark Arrester (if Equipped)41
Fuel System Maintenance42
- Replacing the Fuel Filter42
- Servicing the Fuel Tank42
Electrical System Maintenance43
- Servicing the Battery43
  - Installing the Battery44
  - Charging the Battery44
- Servicing the Fuses45
Drive System Maintenance45
- Checking the Seat Belt45
- Checking the Rollover Protection System (ROPS) Knobs45
- Adjusting the Tracking46
- Checking the Tire Pressure46
- Checking the Wheel Hub Slotted Nut47
- Adjusting the Caster Pivot Bearing47
Cooling System Maintenance48
- Cleaning the Engine Screen and Engine Oil Cooler48
- Cleaning the Engine Cooling Fins and Shrouds48
- Check and Clean the Hydraulic Unit Shrouds48
Brake Maintenance49
- Adjusting the Parking Brake49
Belt Maintenance50
- Inspecting the Belts50
- Replacing the Mower Belt50
- Replacing the Hydraulic Pump Drive Belt51
Controls System Maintenance52
- Adjusting the Control Handle Position52
- Hydraulic System Maintenance55
  - Servicing the Hydraulic System55
- Mower Deck Maintenance57
- Cleaning63
  - Cleaning under the Mower63
  - Waste Disposal63
Storage64
- Cleaning and Storage64
Troubleshooting65
Schematics67

Toro Z Master 74925TE - Changing the Engine Oil

Table of Contents

Related product manuals