Toro Z Master G3 - Installing the Roll over Protection System

3.Removethewheelnutsfrombothsidesofthe
vehicleandremovetherightangleretainingplate.
Discardthescrewsandretainingplate.
4.Mountthewheelswiththevalvestemtotheoutside
andsecurethemwiththewheelnutspreviously
removed.
5.Torquethewheelnutsto95ft-lb(128N·m).
6.Removethejack-stands.
Figure4
4
InstallingtheRollOver
ProtectionSystem
Partsneededforthisprocedure:
1
RolloverProtectionSystemKit(ROPS)
Procedure
InstalltheRolloverProtectionSystemKit.Followthe
instructionsincludedwiththeROPSKit.
5
InstallingtheSeat(Models
thathaveaxedornonipup
seat)
Partsneededforthisprocedure:
1
Seat
1
Seatplate
8
Flangenuts(3/8inch)
4
Spacers(3/8inch)
Procedure
1.Removethehydraulicunitshroudfromthemachine.
Figure5
1.Hydraulicunitshroud2.Bolts
2.Removethe4nutsholdingtheseatplatetothe
machine.Discardthesenuts,theyareusedfor
shippingonly.
3