Torso Electronics T-1 - T1 Config - MIDI i;o; T1 Config - CV;Gate Page

215
The T-1 Notebook : Reference & Guide
214
The T-1 Notebook : Reference & Guide
NOTESNOTES
System Conguration
10
System Conguration
10
Setting Function Description
1 MIDI USB In MIDI settings for USB connection Option for clock, start/stop. When On T-1
would typically be a secondary follower.
Program change received to allow
cueing / changing patterns when On.
2 MIDI USB Out MIDI settings for USB connection Option for clock, start/stop. When On T-1
would typically be a primary lead.
Program change send when patterns are
changed on T-1, when set to On.
3 MIDI TRS In MIDI settings for TRS connection Option for clock, start/stop. When On T-1
would typically be a secondary follower.
Program change received to allow
cueing / changing patterns when On.
4 MIDI TRS Out MIDI settings for TRS connection Option for clock, start/stop. When On T-1
would typically be a primary lead.
Program change send when patterns are
changed on T-1, when set to On.
5 Thru Port Thru or Out Selects how the rear thru port behaves.
Thru transmits MIDI In to Thru. Out acts
as a second output, reecting MIDI Out.
When set to Out additional conguration
parameters are made available similar to
MIDI Out.
1
3
2
4
5
T1 Cong - MIDI i/o
Focus on MIDI Input and Output settings. Mainly covers the USB and MIDI trs
connections which are accessed at the rear of T-1.
t|so
1
2
3
84
5 6 7
T1 Cong - CV/Gate Page
General control voltage and gate output routing which is based on MIDI Channels routed to
CV/Gate connections which are accessed at the rear of T-1. CV can be congured as
additional gates. Typically CV and Gates are associated with modular system interfacing.
Preset Settings
2-Voices
Drum Gates
3-Voices
User
t|so