cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the
surface and assemble as indicated.
NOTE:
Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel.
CAUTION:
3
at,
Pedestal stand Assembling (for 24L365 Series)
*
Warning: Ensure the power cable is not pinched when attaching the pedestal stand as this could
cause an electric shock.
2
1
3
Please tighten the base and TV set together with two BT 4×18 screws.
Base mark“B”Base mark“B”
Base B
Base A
Base mark“A”Base mark“A”
BT 4X18 2 PCS
Base A 1PC Base B 1PC
Introduction / Getting started
To Next Page
Loading...
