107
Using the TV’s features
Using REGZA-LINK®
REGZA-LINK
®
input source selection
If a REGZA-LINK
®
device with HDMI
®
switching capability
(e.g. Audio Receiver) is connected to the HDMI
®
input, you can
select another REGZA-LINK
®
device that is connected to the
master HDMI
®
device using the TV’s INPUT button, see “Selecting
the video input source” on page 56.
VOLUME and MUTE controls of Audio Receiver
With your TV’s remote control, you can adjust or mute the sound
volume of the Audio Receiver.
❖ VOL+/VOL- buttons adjust the volume level.
❖ MUTE button turns off the sound.
To use this function:
❖ Set Speaker Preference to Audio Receiver in the
REGZA-LINK
®
Setup menu.
❖ Confirm that a connected REGZA-LINK
®
device (such as
DVD player, etc.) is selected for the Audio Receiver input
source.
❖ You can also use this function when the audio receiver is
connected to the TV’s DIGITAL AUDIO OUT terminal (not
HDMI
®
connection). In this case, select a digital audio input
mode on the Audio Receiver.
These functions depend on the device connected.
Other REGZA-LINK
®
functions
When the Enable REGZA-LINK
®
and each item in the
REGZA-LINK
®
Setup menu are set to On, the following
functions will be enabled.
Item: Description:
TV Auto Input
Switch
If a connected HDMI
®
device starts playing video or audio, the TV will
automatically switch to the appropriate HDMI
®
input.
TV Auto Power If a REGZA-LINK
®
device is turned on, the TV turns on automatically.
Device Auto
Standby
If the TV is turned off the TV will send a message to turn off all of the
REGZA-LINK
®
devices connected to the TV.
To Next Page
Loading...
