Copyright 2013 All Rights Reserved Page 4 of 4
13 Press “MENU” button on the remote controller and select “Install and Retune” by using “Left” or
“Right” button to perform the “First time installation” function.
Press “OK” button and the following menu screen will be displayed as showing figure6.
Figure6
Select “First time installation” by using “Up” or “Down” button and press “OK” button.
“Do you want to delete all channels and setting for first time installation?” will be displayed.
Select “Yes” and press “OK” button.
“First time installation” will be displayed as shown figure7.
Figure7
Follow the instructions on the screen and consult the owners manual for the first time installation.
14 The TV upgrade is now complete.
To Previous Page
Loading...
