Setting Hotel Mode
Enter to service mode and select Hotel Mode menu by pressing P or P .
After selecting Hotel Mode, press + to enter details setting in Hotel Mode.
To select menu, press P or P and press OK to enter the adjustment menu of table bellow.
To move the cursor in the adjustment, press + or -.
1. By pressing P or P , OPT2 setting will change the value either 1 or 0 on selected items as
follows;
OP2
Note:
Exact Scan is shown only for 1080p panel model with video input mode except pc.
4:3
Super Live 1
Cinema 1
Subtitle
14:9
(8) OTHER STATUS :
Other status information : Display three numbers of 2 byte data.
OPT2 FUNCTION DESCRIPTION 1
0
(Normal)
D7 (bit7) - (no use) - -
D6 (bit6) Enable mode that TV On will be appeared in
forced when turning the main power ON
Enable Disable
D5 (bit5) FRONT Key Disable Enable
D4 (bit4) All keys except input selector key
(Video/TV)
Disable Enable
D3 (bit3) User remote control operation Disable
(Service mode and
Supere
To Next Page
Loading...
