OP8
LED Indication
The Green and Red LEDs on the TV (at the bottom center of the TV) indicate the TV's status, as
described below.
z
Red ON (solid) and Green OFF = The TV power cord is plugged in.
D6 (bit6) ~
D0 (bit0)
Forced speaker volume 0 ~ 100 [decimal] (Normal: 0)
Value above 100 is no effect.
OPT8 FUNCTION DESCRIPTION 1 0 (Normal)
D7 (bit7) ~
D3 (bit3)
- (no use) - -
D2 (bit2) Enable mode that picture mode will be set in
forced when turn ON the main power
Enable
(Display the
language only)
Disable
D1 (bit1) ~
D0 (bit0)
Forced picture mode 0 [dec]: Dynamic (mode-1)
(Normal)
1 [dec]: Standard (mode-2)
2 [dec]: Mild (mode-3)
3 [dec]: Memory (mode-M)
To Next Page
Loading...
