Toshiba 37XV505D - Page 22

6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity.
When handling the module, use a wrist ground or anchor ground.
7. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for an extended
period of time.
8.
Do not store the LCD module below the temperature conditions described in the specifications.
Failure to do so could result in freezing of the liquid crystal due to cold air or loss of resilience
or other damage.
9. Do not disassemble the LCD module. Such actions could result in improper operation.
Page
3
sur
4
Handling the LCD Module
16/07/2010
file://C:\Documents and Settings\Serge\Bureau\toshiba_37xv505d
-
02_[ET]\37XV505
...