Watching TV programmes
Selecting the menu language
You can select a language for the on-screen display.
• Use the menu: SETUP
• Use the item: Menu Language
Changing the position
1 Enter the desired position number using the
Number buttons on the remote control.
For positions below 10, use 0 and the required
number e.g., for position 1.
2 You can also change the position by using PU
or Pu.
The position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
NOTE:
Changing positions between di erent format channels
takes several seconds.
Switching between two positions
You can switch two positions without entering
actual position number each time.
1 Select the rst position you want to view.
2 Select the second position with the Number
buttons (0-9).
3 Press . The previous channel will be displayed.
Each time you press
, the TV will switch back and
forth between the two positions.
Displaying the on-screen information
1 Press to display the following on-screen
information.
4 ABCD
Stereo
The information will disappear in several
seconds.
To erase the display instantly, press again.
Sorting positions
Ex.: To swap channel ABCD (Prog.1) for channel
MNOP (Prog.4):
1 From the SETUP menu, press or to select
Manual Tuning menu, and then press OK.
2 Press or to select the channel ABCD, then
press .
Manual Tuning
Pos.
0
1 ABCD
2 EFGH
3 IJKL
MNOP
4
5
6
7
Label
3 Press to select the new position “4”, then
press .
4 Press to select the channel MNOP, then press
.
5 Press to select the new position “1”, then
press .
6 Con rm new Manual Tuning menu.
Selecting the external input source to view
1 Press o on the remote control until the
external input mode list appears on the screen,
then press , or o to select appropriate
input source.
2 Press OK.
VIDEO (o standard video input) ,
HDMI (HDMI input)
NOTE:
If the Inputs list is displayed by pressing p / o and U
or u on the left side of the TV and U or u, the options
are VIDEO/HDMI/TV.
Labeling external input sources
These input labels are shown in the input selector.
You can label external inputs according to the
devices you have connected to the TV.
1 From the PREFERENCES menu, press or
to select Input Labelling and then press OK.
2 Press or to select the item you want to
label and press or to select --, Ampli er,
Cable, DVD, Game, PC, Recorder, Satellite or
VCR, or press the RED button to turn on the
skip.
– 13 –
To Next Page
Loading...
