Toshiba 40L2400 Series - Other Features Settings

Other features settings
Setting the On Timer and Sleep Timer
The Timer is especially useful if you want the TV to
turn itself on or o after a selected period of time.
• Use the menu: APPLICATIONS
• Use the items: On Timer and Sleep Timer
• Use the button: OK, Number buttons (0-9),  and

Con gure the following settings in On Timer:
Enable On Timer: Select On or O .
Input: Select an input source.
Position: Select a channel.
Volume: Select a volume.
Time Until Power On: Set a time until the timer
turns on.
After con guring the settings, select Done and
press OK.
Press EXIT to exit the menu. Set the Standby
mode by pressing 1 on the remote control.
NOTE:
The TV will automatically turn itself o after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
Using the Continuous Viewing Timer
To prevent watching TV continuously for long
periods of time, you can set a message to appear
that suggests that the viewer takes a break. This
is especially useful for stopping children from
watching TV for long periods of time.
• Use the menu : APPLICATIONS and Continuous
Viewing Timer.
• Use the items : 60 min, 120 min, 180 min or O .
When the set time has passed, a message
suggesting the viewer takes a break appears.
Press OK, BACK or EXIT to clear the message.
NOTE:
• If the power is turned o before the set amount of
time has passed, the timer is reset.
• If the set amount of time is changed, the timer is
reset.
Using the Auto Format
When the TV receives a true HDMI signal picture
and the Auto Format is On, it will automatically be
displayed in HDMI signal format, irrespective of the
TV’s previous setting.
• Use the menu: PREFERENCES and Display
Settings
• Use the item: Auto Format
Activating the 4:3 Stretch
When 4:3 Stretch is activated, this function will
switch 4:3 format programmes into a full screen
picture.
• Use the menu: PREFERENCES and Display
Settings
• Use the item: 4:3 Stretch
NOTE:
In HDMI signal format, this function is available.
Activating Blue Screen
With the Blue Screen function On, the screen
will automatically turn blue and the sound will be
muted (except for external input) when no signal is
being received.
• Use the menu: PREFERENCES
• Use the item: Blue Screen
Setting the Automatic Power Down
The TV will automatically turn itself o (standby)
after approximately 4 hours, if you don’t touch the
control buttons on the remote control or on the TV
control panel.
• Use the menu: PREFERENCES and Energy Saving
Settings
• Use the item: Automatic Power Down
Setting the No Signal Power Down
The TV will automatically turn itself o after 15
minutes when no signal is detected. You can change
the setting to O .
Default setting is all On.
• Use the menu: PREFERENCES, Energy Saving
Settings and No Signal Power Down
• Use the modes: On or O
NOTE:
• Low signal strength of channel (no signal detection)
• Only Audio L/R is connected to external input to
listen to music through the TV speakers.
• A warning message will appear 1 minute before
turning o .
Setting the Power Saving Indicator
(except for 32P2400 Series / 32L2400 Series)
You can display the current power saving status.
• Use the menu: PREFERENCES, Energy Saving
Settings
• Use the item: Power Saving Indicator
• Use the modes: On or O
Press
when the Power Saving Indicator is
On to display the Saving Level.
• The longer the Saving Level display bar is, the
higher the power save e ect is.
– 18 –