• The saving level is also displayed when the
Picture Mode or Backlight settings are
changed.
Panel Lock
Panel Lock disables the buttons on the TV. All
buttons on the remote control can still be used.
• Use the menu: PREFERENCES
• Use the item: Panel Lock
NOTE:
When Panel Lock is On, a reminder will appear when
the buttons on the TV are pressed.
If the standby button is pressed, the TV will switch o
and can only be brought out of standby by using the
remote control.
Viewing the Software Licences
The licences for the software used in this TV are
available for viewing on screen.
• Use the menu: SETUP
• Use the item: Software Licences
• Use the button: OK
A screen will appear displaying all of the licencing
information required for the TV’s software.
Setting the Colour System
This feature is available in Standard video
(composite) inputs mode.
• Use the menu: SETUP and Colour System
• Use the item: Auto, PAL, SECAM, NTSC 4.43 or
NTSC 3.58
NOTE:
Con rm that Colour System is set to “Auto”. If not,
select “Auto” with or .
Viewing the System Information
This feature can be used to check the version of
software currently installed.
• Use the menu: SETUP
• Use the item: System Information
• Use the button: OK
Resetting the TV
Reset TV will reset all TV settings, including stored
channels, to their original factory values.
• Use the menu: SETUP
• Use the item: Reset TV(select Ye s and press OK)
NOTE:
When the set powers back on, the rst time screen will
appear (- page 10).
Teletext
This TV has a multi-page Teletext memory, which
takes a few moments to load and it o ers two
ways of viewing Teletext Auto and List which are
explained below.
Setting up the Teletext mode
To select a language for Teletext:
The language 1-4 option enables the display of
di erent language when using Teletext.
• Use the menu: PREFERENCES
• Use the item: Teletext Language
Language 1: English, German, Dutch, Flemish,
Russian, Bulgarian, Ukranian, Lettish, Lithuanian,
Czech, Slovak, Estonian
Language 2: Polish, German, Dutch, Flemish,
Estonian, Lettish, Lithuanian, French, Serbian,
Croatian, Slovenian, Czech, Slovak, Rumanian
Language 3: English, French, Hebrew, Turkish,
Arabic
Language 4: English, French, Hebrew, Turkish,
Farsi (Iranian/Persian)
To select Teletext mode:
Select a channel position with the desired Teletext
service.
• Use the menu: PREFERENCES
• Use the item: Teletext
• Use the modes: Auto and List
Teletext general information
TEXT button
Pressing TEXT once will bring up the teletext screen.
Press again to superimpose the teletext over a
normal broadcast picture. Press again to return
to normal TV mode. You need to return to normal
viewing if you wish to change channels.
When you rst press TEXT to access the text service,
the rst page you see will be the initial page.
In Auto mode, this displays the main subjects
available and their relevant page numbers.
In List mode, you will see the page numbers
currently stored on the each colour button.
Sub-pages:
Once in this chosen page, if there are sub-pages
they will automatically load into memory without
changing the one you are reading. If there are many
sub-pages, it will take a long time for them all to
load and this will depend on the speed with which
the broadcaster transmits them.
To access the sub-pages in memory, press or
to view them.
– 19 –
To Next Page
Loading...
