HDMI CEC
1 From the OPTION menu, press or to select
HDMI CEC and press OK ,then press or
select On or Off.
2 When you select HDMI CEC On, you can press
or to select Auto Standby then press or
select On or Off.
This function can turn the TV to standby
automatically.
3 When HDMI CEC is on, you can check the device
list of connecting to the TV.
Using the OPTION menu
Selecting the OSD language
You can select a language for the on-screen display.
1 Press MENU, then press or to display
OPTION menu.
2 Press or to select OSD Language.
3 Press or to select the desired language.
Audio Languages
This feature allows a program or lm to be viewed
with a choice of sound track language, provided
multiple language tracks are being broadcast.
1 From the OPTION menu, press or to select
Primary Audio Language and press OK, then
press , , or to select an option.
Setting the Location
You can select either Home or Store mode. Home
is recommended for normal home use. Select Store
when using a TV for displaying in a shop, etc.
1 From the OPTION menu, press or to select
Location.
2 Press or to select Home or Store.
Select Disk
Press OK to enter into the Select Dick page , and
thenpress or to select disk drive.
NOTE:
If connected device is not divided to some drives,
only C: is available.
Check PVR File System
Test whether the connected USB storage device
functions properly.
USB Disk
Indicate the status of the disk when checking PVR
le system.
Format
Format the connected USB storage device.
Speed
Storage speed.
Free Record Limit
Maximum recording time capacity.
DigitalPOP
when using a TV for displaying in a shop and select
the Store mode location, then you can select the
Digital POP On to Show the product selling point.
1 From the OPTION menu, press or to select
Digital POP.
2 Press or to select On or Off.
PVR File System
1 From the OPTION menu, press or to select
PVR File System and press OK.
3 Press or to go through the list adding the
details of the On Timer and press or to make
selections.
Hour: Select the hour from hour 00-hour 23.
Minute: Select the minute from 01-59.
Source: Select a video input source .
Channel: Select the channel that will be set
Volume: Select the volume that will be set
when the TV turns on.
4 When all the details have been entered, press
Menu to start the timer.
26
Subtitle Language
1 From the OPTION menu, press or
to select Subtitle Language and press OK, then
press , , or to select an option.
TTX Language
To select a language for Teletext:
1 From the OPTION menu, and then press
or to select TTX Language.
2 Press or to select the required language.
such as Cyrillic, Arabic, Frasi, Pan-Euro, Greek.
To Next Page
Loading...
