ATV Manual Tuning
1 When you switch to ATV source, you can from
the CHANNEL menu, press or to select
ATV Manual Tuning.
2 Press OK to display the ATV Manual Tuning
menu.
Press or to select the program position
you want to arrange.
Channels adjustment
Auto Tuning
1 From the CHANNEL menu, press or to
select Auto Tuning.
·The channel menu may be changed to suit your
personal preference.
SW Update (OAD)
OAD Tuning
NOTE:
This feature is not available for 24inch TV .
Using the Analog Audio Out
This feature is used for selection of Headphone
and Lineout.
Analog Audio Out can be used as both Headphone
and Lineout.
2 Press OK to display the DVB Select type.
Press or to select DVB-Tor DVB-C.
3 When you select DVB-T mode, press , ,
or to select the country and press OK.
Input the EWS Local Postal Codes and start
the Auto Tuning.
The television will start to search for available
DTV/Radio or ATV channels. The progress
bar will indicate the scan status.
4 When you select DVB-C mode, it will appear
the DVB-C-Scan Menu.
You must allow the television to complete
the search.
When the search is complete, it will switch to
the rst channel.
23
Using the Digital Audio Output
1 From the SOUND menu, press or to select
the Digital Audio Output.
2 Press or to select Auto or PCM.
StorageTo 1
Sound System I
Color System AUTO
Current CH 1
Search
Fine-Tune
SAVE
Scan type Full
DVB-C Scan Menu
Auto
Auto
Auto
Frequency(KHz)
Network ID
Symbol(ks/s)
DTV Manual Tuning
NOTE:
The content of this menu varies depending on the DTV
input that is currently selected.
This feature is available for service engineers or can
be used for direct channel entry if the multiplex
channel is known.
To Next Page
Loading...
