1 Press MENU, then press or to display
OPTION menu and select PVR File System.
2 Press or to select the USB-HDD disk ,and
press or to select Format.
3 Press OK.
A screen will appear displaying all of the
licencing information required for the TV’s
software.
Parental Control
The Parental Control feature allows you to block
programs according to their rating levels.
1 From the LOCK menu, press or to select
Parental Guidance, and press OK.
2 Press or to adjust the settings.
Password is required to view blocked programs.
Setting the Lock menu
2 When Lock System is set to ON ,then you can
Set Password , set the Block Program and
set Parental Guidance.
3 You can change password to select
Set Password and press OK.
Old password is required for changing to new
password.
Password should be a four digit number.
4 Block Program can set special DTV program
as locked.
Select Block Program and press OK.
Program list appears, then you can set/reset
Lock by pressing green button.
Password is required to view blocked programs.
User Reset
Reset TV will reset all TV settings, including stored
channels, to their original factory values.
1 From the OPTION menu, press or to
select User Reset.
2 Press OK to select.
A screen will appear warning that all settings
will be lost. Select Yes, and then press OK to
continue.
When the set power back on,the rst time
screen will appear. Press OKto continue,
and proceed to the Auto Tuning menu.
EWS Local Postal Codes
This function is for Indonesia. Inform people of early
warning information, especially about natural
disaster. Press number button and then set up the
“EWS Location Code”, when finished, once receiving
safety warning information, the TV will sound the
alarm according to the warning class.
For the lowest class, you can exit the message by
pressing MENU button; for higher classes, you can’t
exit the message and also it’s no use for any buttons.
Please Input local Postal codes
Use 0-9 Digital key to input
Yes
No
27
How to format of USB-HDD
Insert the USB-HDD to the USB port of TV set,
then switch to DTV source.
SW Update (USB)
Insert an USB device with upgrading software
to upgrade the TV system.
1 Connect USB storage device to USB input
terminal.
2 Switch to DTV or ATV source.
Lock System
1 Press MENU and press or to select
Lock System then press OK .
Password is required for opening Lock System.
Default password is 0000.
2 From the OPTION menu, press or to select
SW Update(USB).
To Next Page
Loading...
