(1/3)
MAIN BOARD EXCHANGE
When Main board is exchanged, the Application SW (Firrmware) and Model Setting need to
be updated and the serial number needs to be written the serial number into Main Board
(see “WRITING SERIAL NUMBER INTO MAIN BOARD”).
Please update in the following procedures.
Updating of Software and Model Setting
1. Copy the Application SW (Firmware) file and the Model Setting file to the root of the USB
mass storage device.
Application SW:
[Example] UPDATE_EU14_8.1.56.00.01.1_INIT_CLEAR#.enc
Model Setting File:
Model setting files are categorized by shipout.
Each Shipout folder contains model setting files.
This Application SW is for all of
L74/L64 models.
This number is
an example.
“enc” means encrypted.
This SW is encrypted for
security.
[Example] Model_Setting_L6453_32_L.bin
To Next Page
Loading...
