14
General Operation
101 Rbb Berlin
Social Service
13:00-14:00 26 Oct.
PVR Reminder Detail
·
Select and set Start time/End Time: Press the [ OK ] button,
and then press the [ 0-9 ] button to input the desired numbers.
(Selecting and setting end time is only available for PVR)
·
Repeat: You can select from Once, Daily, Mon to Fri, Sat to Sun,
Sun, Mon, Tue, Wed, Thu, Fri and Sat.
NOTES
·
Reminder is only available for programmes that haven’t been aired
yet.
·
A storage device must be attached to the television for recording
purposes.
·
The TV will record the program even in standby mode.
·
The PVR function is only available on certain models in some
country/region.
Page Up/Down
In Guide (EPG), press the [ P / P ] buttons to move programme
listing page up/down.
Schedule
In Guide (EPG), press the RED button view a list of scheduled
reminders and recordings.
Detail
In Guide (EPG), press the GREEN button to display detailed
information of the selected programme (only available on certain
models in some country/region).
24h-
In Guide (EPG), press the YELLOW button to go backwards a day.
24h+
In Guide (EPG), press the BLUE button to move forwards a day.
PVR/T.Shift
PVR
The PVR function allows you to easily record digital television content
for later viewing. The function is only available in DTV source. To use
PVR, you must connect a USB device for recording. The format of the
storage disk should be FAT32. The PVR will not function if a data storage
device has not been connected.
Schedule Recording
In Live TV, press [ GUIDE ] button, select the programme to be
played, press [ OK ] button to set the appointment time and period,
the reservation is successful. Press the RED button to view the
schedule recording. In the schedule recording list, you can readjust
the reservation information that has been set.
Instant Recording
Press [ Down ] button to select PVR.
Select the partition, and the USB device speed will be tested (appear
when using for the first time).
You can choose to Manual stop or automatically match the
programme time.
Standby record
If you press the power button during recording, TV will go into
standby mode but the recording process is still going on. If you
press power button again and wake up the TV, recording process
will not be affected. After recording, the recorded file will be
automatically saved to the disk.
Recording List
Viewing the recorded programmes.
Press the [ Down ] button on your remote to select Recording List
> Recorded, You can watch or delete recorded programmes.
NOTES
·
Available on Channel (DTV) source only.
·
The storage space of your USB device should be no less than 2G (for
15 minutes high definition video).
·
If the transfer rate of your hard disk is too slow, a pop-up notice will
appear, in this case, you can try another one.
·
The PVR function doesn’t support analogue channels.
·
The schedule recording function is not available while you are
watching a programme that is currently being broadcast.
·
Some broadcasters may restrict to record the programme.
·
During the recording progress, channels locked with Channel Lock
(password needed) are disabled to watch.
·
The PVR function is disabled for scrambled channels (CI module
needed).
·
The PVR function is only applicable in certain models.
T.Shift
This option allows you to pause and rewind live TV. This function
operates by recording temporarily to a storage device. Please ensure
your storage device is connected and there is enough free disk space.
Otherwise the recording will not commence.
Press the [ Down ] button on the remote to select T.Shift and then the
menu will appear, click the [II] icon to pause the live broadcast and click
the [
►
] icon to play. Click the [ ] icon to rewind and click the [ ]
icon to fast forward. Click the [
■
] icon to exit the function and watch the
current broadcast.
NOTES
·
The T.Shift function doesn’t support analogue channels.
·
The storage space of the USB device should be no less than 1G.
·
The T.Shift function is disabled for channels locked with Channel
Lock or scrambled channels (CI module or password needed).
·
The Timeshift function is only applicable in certain models in some
country/region..