6
TV Rear
TV Front
Getting started
NOTES
Check the jacks for position and type before making any
connections. Loose connections can result in image or color
problems. Make sure that all connections are tight and secure.
Not all A/V devices have the ability to connect to a TV, please
refer to the user’s manual of your A/V device for compatibility and
connections procedure.
Before connecting external equipment, remove the mains plug from
the wall socket. Otherwise, it may cause electric shock.
For 43"
Item Description
Remote sensor
Receive remote signals from the remote control.
Do not put anything near the sensor, as its function
may be affected.
Power
indicator
The light is red in standby mode, the light is green
when TV is on.
Standby /
Source
Press the single button when in standby mode, TV
will be turned on. Press the single button to call up
the menu, when the focus is on “Power Off”, wait for
3 seconds, then the TV will go into standby mode
automatically.
/ Press the single button to call up the menu and
then select among the different input signal sources.
Single button / Remote sensor / Power indicator
Power cord
To Next Page
Loading...
Need help?
General