Toshiba 46TL868G - Page 39

When TV is powered on by power button, tune to the last channel or input.
POS/VIDEO
(only available when "Change
POS/VIDEO" is On)
0-99 0-99 (ATV Channel Position) 0 - Grayed out when Hotel Mode = [Off]
- Grayed out when "Change POS/VIDEO"
= [Off]
DTV DTV (DTV channel number can not be set. The last selected channel is shown.)
VIDEO1 VIDEO1
VIDEO2 VIDEO2
HDMI1 HDMI1
HDMI2 HDMI2
HDMI3 HDMI3
HDMI4 HDMI4
PC PC
Change Volume Off TV volume level does not change when TV powers on Off - Grayed out when "Hotel Mode" = [Off]
On TV volume level is forced to "Volume" level when TV is powered on
Volume
(only available when "Change Volume"
is On)
0-100 Volume level when TV is powered on 30 - Grayed out when "Hotel Mode" = [Off]
- Grayed out when "Change Volume" =
[Off]
Change Picture Mode Off Picture setting mode does not change when TV is powered on Off - Grayed out when "Hotel Mode" = [Off]
On Picture setting mode is forced to "Picture Mode" mode when TV is powered on
Picture Mode
(only available when "Change Picture
Mode" is On)
AutoView AutoView AutoView - Grayed out when "Hotel Mode" = [Off]
- Grayed out when "Change Selectable
Picture" = [Off]
Dynamic Dynamic
Standard Standard
Movie 1
(EU:Hollywood 1)
Movie 1
(EU:Hollywood 1)
Movie 2
(EU:Hollywood 2)
Movie 2
(EU:Hollywood 2)
TV Power Disabled TV returns to previous Standby/On State when AC power is applied Disabled - Grayed out when "Hotel Mode" = [Off]
Force On Power TV on when AC power is applied
Force Standby Put TV in Standby when AC power is applied
Position Change on HDMI Input On
RF tuning via P , P , RETURN, and number buttons is allowed. (Normal operation)
On - Grayed out when "Hotel Mode" = [Off]
Off
When viewing HDMI input, RF tuning via P , P , RETURN, and number buttons is
disabled
TOSHIBA WEB-ZEUS
>> terms and conditions >> privacy policy
Copyright © 1995-2011 TOSHIBA Corporation, All Rights Reserved.