Print this page
Service Mode
Self Check
1. "Self Check" screen is shown by pressing "9" button on Remote Control during display of Adjustment menu in the service mode.
2. The size of characters in "Self Check" screen should be same as the user menu.
ADJUSTMENT
Item Explanation/Data Format
1 TV Model Model name and Panel vendor
SA : SAMSUNG AU : AUO SH:SHARP
LG : LGD CM:CMI
2 TV Model ID No function of this display.
3 Boot Code Version Version information of boot code.
4 APP SW Version Version information of Application SW.
5 FRC SW Version Version information of FRC SW.
6 EEPROM Version Version information of EEPROM data.
Display 1 byte data. (Hex)
7 A/D Adjust PAL A/D adjustment status for PAL signal
OK :
A/D adjustment is set correctly.
NG :
A/D adjustment is not set correctly.
— :
A/D adjustment is not needed because the picture format is not used.
8 A/D Adjust NTSC A/D adjustment status for NTSC signal
OK :
A/D adjustment is set correctly.
NG :
A/D adjustment is not set correctly.
To Next Page
Loading...
