English - 14 -
(**) Limited Models Only
High
Select.
DI Film Mode:
setting Auto and O. Highlight your desired setting
Select.
Blue Stretch:
On or O.
PC Mode:On or O.
HDMI RGB Range (HDMI input only): Sets correct
Auto Full
Limit
Select.
HDMI Input Mode (HDMI input only):
Mode 1 (1.4)Mode
2 (2.0)AutoReset. Highlight your desired setting
Select.
Dolby Vision Notication:
On or O
on as default.
Reset to Default: Resets all setting to factory default
settings.
Adjusting the Audio Settings
can access the sound settings menu via the Settings
the Home
Accessing Audio Settings via Settings Menu
HomeSettings
Display & AudioSelect
Scroll down to Audio Settings
Select
on the right hand side of the screen.
Accessing Audio Settings while watching the TV
Home
of the screen. Scroll down and highlight Sound then
Select
on the right hand side of the screen.
Audio Menu Content
Dolby Mode:
The default setting is Smart
are Film News Music Smart and O. They are
content that you are viewing. If you select Smart this
Select.
DTS Mode:
Dolby Mode
6 different setting Standard Music Film Clear
Voice, Enhanced Bass and Flat. The default setting
is Standart
Select.
Advanced Settings:
Dialogue ClarityTruVolume and DTS Virtual:X on
Select to
Balance
and Equaliser settings.
Dialogue Clarity: Enhances signal clarity for clear
TruVolume:
volume level across content.
DTS Virtual:X:
cinematic surround sound image without surround
Speaker Virtualiser:
Dolby ModeO.
O Surround Virtualiser and Dolby Atmos
Volume Leveller:
if the Dolby Mode O. Allows
OLowMid
High
Balance:
The default setting is 0.
Equaliser:
Dolby Mode
100Hz500Hz1.5kHz5kHz
10kHz
the default setting is 0 for all.
TV Speakers:Select
Reset: Resets all settings to factory defaults.
Settings
Settings
menu. You can access the Settings menu from the
Home
scroll across to Settings
To Next Page
Loading...
