Toshiba 28L110U - User Manual

Other manuals for Toshiba 28L110U

Quick Setup Guide2 pages

Questions and Answers

B
Brandon ContrerasSep 18, 2025
Why do the control buttons on my Toshiba 28L110U not work?
- C
  Catherine DavisSep 18, 2025
  If the control buttons on your Toshiba TV do not work, make sure that the Panel Lock option is set to Off. Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV.
S
Samantha BradfordAug 25, 2025
Why does my Toshiba TV have a good picture but no sound?
- M
  marypatelAug 25, 2025
  If your Toshiba TV has a good picture but no sound, check these items: First, increase the volume and ensure the sound isn't muted. Make sure headphones are not connected, as this will disable the TV speakers. If using a home theater system, sound bar, or external speakers, ensure they are powered on, not muted, and the correct output mode is selected. If connected with a digital optical cable, go to the Sound menu, highlight Digital Audio Format, then press ENTER. Highlight Audio Format, then press ENTER. Press S or T to select PCM, then press ENTER. Also, verify that the audio cables and antenna/cable TV are connected correctly and securely. Finally, the audio cables you are using may be faulty, so try a new set.
J
Jeffrey PowellAug 25, 2025
How to fix a Toshiba 28L110U remote control that is not working?
- A
  Alexandra SchneiderAug 26, 2025
  If your Toshiba TV remote control isn't working, try these steps: First, ensure the TV's power cord is plugged into a working outlet. Make sure there are no obstructions between the remote and the TV's remote control sensor. Point the remote directly at the sensor on the TV. Ensure you've removed any plastic wrapping from the batteries. Verify the batteries are installed correctly. Finally, replace the batteries with new ones.
R
robinsonjoshuaAug 26, 2025
What to do if my Toshiba 28L110U TV displays a 'No signal' error message?
- Y
  ysmithAug 27, 2025
  If your Toshiba TV displays a 'No signal' error message, press the INPUT button and ensure you've selected the correct input for the device or service you are trying to use. If you are using a cable or satellite box, use the remote that came with that box to change channels.
A
Anne MooneySep 22, 2025
How do I remove a retail banner displayed on my Toshiba TV?
- J
  joshua08Sep 22, 2025
  If a retail banner is displayed on your Toshiba TV, you selected Store Mode when you ran the Initial Setup wizard. Go to the Installation menu, highlight Store / Home Mode, then press W or X to select Home, then press ENTER.
P
phillipclementsSep 23, 2025
Why doesn't the device show up in the list of CEC devices on my Toshiba 28L110U TV?
- M
  Mrs. Jacqueline Martinez MDSep 23, 2025
  If the device does not show up in the list of CEC devices on your Toshiba TV, make sure that the device is turned on, the HDMI cable is connected securely to your TV and the device, the device is connected to your TV with an HDMI cable, the HDMI-CEC Control feature is turned on, and the device is a CEC device.
J
joan11Sep 10, 2025
How to eliminate audio noise from my Toshiba 28L110U TV?
- L
  laurencrawfordSep 10, 2025
  To eliminate audio noise from your Toshiba TV, other devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.
D
Denise JohnsonSep 12, 2025
Why can't I select my device when I press INPUT on my Toshiba 28L110U?
- P
  Peter DanielsSep 12, 2025
  If you cannot select your device when you press INPUT on your Toshiba TV (it is grayed out), make sure that the video input source for the device is not hidden.
S
Sarah KellySep 3, 2025
Why is there a dark or poor picture on my Toshiba TV, but the sound is good?
- J
  Joshua ScottSep 3, 2025
  If your Toshiba TV has a dark, poor, or no picture but the sound is good, try the following: First, try another channel, as the station may be experiencing problems. Ensure that the antenna or cable TV is connected correctly and securely. Adjust the brightness settings. Press PIC SIZE to change the aspect ratio. If you're using an antenna and the signal strength is low, adjust it or use a more powerful antenna with an amplifier. Make sure the video cables are securely connected. Also, the video cables you are using may be faulty, so try a new set.
K
Katelyn SerranoSep 1, 2025
Why are there no channels after auto channel search on my Toshiba 28L110U TV?
- C
  Casey TateSep 1, 2025
  If there are no channels after an Auto Channel Search on your Toshiba TV, reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider. Make sure that the antenna or cable/satellite TV is connected securely to your TV. Try replacing the cable between the antenna/cable or cable/satellite box and your TV.