Toshiba 28L110U - Adjusting the Sound; Adjusting Sound Settings

57
28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV
www.tv.toshiba.com
Adjusting the sound
This section covers:
• Adjusting sound settings
• Playing TV audio only
Adjusting sound settings
You can adjust sound settings to improve the sound
quality.
1 Press MENU, press
S or T to highlight Sound,
then press ENTER.
2 Highlight an option, then press ENTER. You can
select:
• Balance—Adjusts the balance between the left
and right audio channels.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• DTS TruSurround—Delivers clear, crisp, and
natural sound over front facing speaker
configurations, complete with rich bass, high
frequency detail, and clear dialog. You can select
On or Off.
• Sound Mode—Selects the sound mode. You
can select Standard, Music, Movie, or Clear
Voice.
• TV Speakers—Turns your TV’s speakers on or
off.
• MTS—(Analog channels received through the
ANT/CABLE IN jack only) Selects the audio
mode. You can select:
• Stereo—Select this option for programs
broadcast in stereo. You can typically leave
your TV in Stereo mode because Stereo
outputs the type of sound being broadcast
(stereo or mono).
• Mono—Select this option if there is noise or
static on weak stereo broadcasts.
• SAP—Select this option to listen to a
secondary audio program, if available. If you
select this option and no secondary audio
program is available, you may not hear
sound. Change the MTS option to Stereo.
• Digital Audio Selection—Lets you
conveniently switch between audio tracks on a
digital channel (when available). This option
temporarily overrides the Primary Audio
Language option on the Sound menu.
• Primary Audio Language—Selects the
language for digital channels.
• Digital Audio Output—Opens the Digital Audio
Output menu where you can adjust digital audio.
• Audio Format—Selects the digital audio
format sent to an external audio system. You
can select:
• PCM (to convert and output sound as
PCM (pulse-code modulation) format).
• Auto (to pass through the original digital
sound).
• Audio Delay—Fine tunes the audio when it
is not in sync with the video.
• Delay adjustment—Lets you set the
amount of delay to manually sync the audio
with the video.
3 Press
W X S or T to adjust the option or select a
setting, then press ENTER.
4 Press EXIT to close the menu.