Toshiba BDX3300KB - Preparation; Connect Power

10
English
Connect USB device
A USB ash drive provides an additional
memory to software upgrade and enjoy
BD-Live
TM
bonus content.
You can also enjoy playing back MP3/
JPEG/MPEG4 les stored in the USB ash
drive.
1. Connect the USB ash drive to the USB
jack on this product.
Notes:
- To enjoy BD-Live™ bonus content, as your
local storage, use a 1 GB or larger USB
ash drive.
- For some Blu-ray
TM
discs with BD-Live
TM
feature,
you may need to plug in the USB ash drive
before loading the disc. Otherwise, the disc may
not playback.
- TOSHIBA does not guarantee 100%
compability with all USB ash drives.
Connect Power
1. Connect the AC power cable to:
- the wall socket.
• The product is ready to be set up for use.
Notes:
– Before connecng the AC power cord, ensure
you have completed all other connecons.
– Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed
on the back of the unit.
– The type plate is located on the back of the unit.
4 Preparation
Always follow the instructions in this chapter
in sequence.
Note:
- Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiaon exposure or
other unsafe operaon.
Prepare the remote control
1. Open the battery compartment.
2. Insert one R03 battery with correct
polarity (+/-) as indicated.
3. Close the battery compartment.
Notes:
- If you are not going to use the remote control
for a long me, remove the baery.
- Risk of explosion! Keep baery away from
heat, sunshine or re. Never discard baery in
re.
• The maximum operable ranges from
the unit are as follows.
- Line of sight: approx. 10 m
- Either side of the centre: approx. 7 m
within 30°
- Above: approx. 7 m within 30°
- Below: approx. 7 m within 30°
7 m 10 m7 m
7 m 10 m7 m