42
13-2-13. The floor, tenant, area, or air conditioner is not displayed
in the proper order.
13-2-14. The date or time is not properly displayed.
13-2-15. The value of air temperature is incorrect.
No. Cause Solution
1 The inputs in the setting file are incorrect. The floor, tenant, and area are displayed in the order of the floor number,
tenant number, and area number set in the setting file. Change the display
order as needed.
The air conditioners are displayed in the order of outdoor system number and
indoor units number set in the air conditioner. Change the display order as
needed. If the order cannot be changed, change the air conditioner number
in the setting file.
No. Cause Solution
1 The controller has been off for long hours. In [Clock and calendar setting] from the option in the menu, set the current
time.
No. Cause Solution
1 The air temperature displays the intake temperature
corrected for the room temperature control of the air
conditioner.
The displayed and actual temperatures differ because correction amount
varies depending on an operation mode (cooling or heating).
To Next Page
Loading...
