124
No.
2
Part name
Electric parts
cover
Procedure
1. Detachment
1) Carry out work of Detachment of
1
.
2) Remove the screws (2 pcs.) which are
fixing the fan guard.
CAUTION
Remove the 2 screws fixing the fan guard
and hang the fan guard with the clamps
during a service.
3) Remove the electric parts cover by
removing screws (2 positions) which fix
the cover. (M4, 0.39"(10 mm), 2 pcs.))
2. Attachment
1) Insert the electric parts cover into back
side of the electric parts box and then fix it
with screws (2 positions).
(M4, 0.39"(10 mm), 2 pcs.))
NOTE:
Be careful that wires are not caught in the
electric parts cover.
2) Attach the fan guard as before and then
fix it with screws (2 positions).
3) Carry out work of Attachment of
1
.
Remarks
Screws (2 pcs.)
Electric parts cover
To Next Page
Loading...