Adjusting the Picture
You can adjust the picture quality (CONTRAST, BRIGHTNESS, SHARPNESS, COLOR and TINT) to suit your personal
preference.
MENU
1 Press MENU (then ADV • or Y) repeat-
edly until the selection in the Picture
menu is displayed in purple.
CONTRAST ............... I _"
BR1(31TNESS ........ I ....... _*
SHARPNESS ........ I ....... +
COLOR ........ I ....... +
T{NT ........ I ....... +
RESET
TO SELECT ITEM PUSH ADV
TO CONTROL PUSH - ÷
ADV •
J
2 Press • (<) or • (>) to adjust the level.
Example: CONTRAST adjustment mode
display
C(_NTRAST ............... I÷
B_GHTNESS ........ I ....... +
SHARPNESS ........ I ....... '
COLO_ ........ I ....... ÷
T_NT ....... I ....... +
RESET
TO SELECT ITEM PUSH ADV
TO CONTROL PUSH ° +
CONTRAST lower higher
BRIGHTNESS darker lighter
SHARPNESS softer sharper
COLOR paler deeper
TINT reddish greenish
To reset the PICTURE adjustment to the factory-preset level
(maximum CONTRAST and all other adjustments centered)
1 Press MENU (then ADV • or T) repeat-
edly until "RESET" in the Picture menu
is displayed in purple.
CONTRAST ............... I+
BRIGHTNESS ........ I ....... ÷
SHARPNESS ........ I ....... ÷
COLOR ........ I ....... ÷
TiNT ........ I ....... ÷
RESET
TO SELECT ITEM PUSHADV
TO C(_NTROLPUSH - ÷
2 Press • (<) or • (>).
RESET
11