Operation and Controls (Remote Control)
This Remote Control allows you to control the functions of your TV set from 16 feet (5m) away. Before attempting to
• u , . . n
operate the Remote Control, install the batterms according to Instalhng and replacing batter es below.
For specific use of each control, consult the corresponding page numbers in brackets•
100
®
®
POWER button
Press to turn on the TV.
Press again to turn off the "IV.
CHANNEL _ buttons
Press • to select next higher channel.
Press • to select next lower channel.
®
®
Channel Number buttons
To select channel 4, press "4" (or press "0% "4").
To select channel 38, press "3", "8".
To select channel 125, press "100", "2", "5" in
sequence.
VOLUME _ buttons
Press • to increase the volume.
Press • to decrease the volume.
(_) RECALL button
Press to display the channel number on the screen.
(_) Menu function buttons [7]
(_ TV/VIDEO button [10]
(_) MUTE button [10|
® RTN button [10]
1 Place the Remote Control with the face down, and
remove the battery cover as shown.
.0".
2 Place the two "AA" size batteries, matching the + and
- signs on each battery to the + and - signs of the
battery compartment.
3 Replace the battery cover until the lock snaps.
CAUTIONS:
• Do not throw your batteries into a fire. Dispose of your
batteries in a designated disposal area.
• Do not combine used old batteries with new ones.
• Do not mix battery types.
Notes:
• If your Remote Control does not always adjust the set
as you wish, you probably need to replace the batter-
ies.
The life expectancy of the battery is about one year.
• Remove dead batteries immediately to prevent battery
acid from leaking into the battery compartment.
• If you do not intend to use the Remote Control for a
long period, remove the batteries.
6
To Next Page
Loading...
