After performing the CH PROGRAM function, you can add or erase
specific channels.
1 Select the channel you want to erase
using the CHANNEL • or • button, or
select the channel you want to add using
the Channel Number buttons.
2 Press MENU (then ADV • or T) repeat-
edly until "ADD/ERASE" in the Set up
menu is displayed in purple.
3 Press • (<) or • (>):
To erase the channel
Press the button until "ERASE" is
displayed in purple indicating that the
channel has been erased from the
memory.
TViCABLE; _TV CABLE
¢H PROGRAM
ADO/ERASE: ,ADD ERASE
CH LOCK: 0 0 O O
LANGUAGE: ,ENGLISH FRENCH
8FANIBH
TO SELECT ITEM PUSH ADV
TO CONTROL PUSH - ÷
TVCABLE" ,TV CABLE
CH PRIAM
AOOERASE: ADO_ERASE
CH LO_K: 0 0 _
LANGUAGE¸ ,ENGLISM FRENCH
SPANI_M
TO SELECT ITEM PUSH ADV
TO CONTROL PUSH - ÷
To add the channel
Press the button until "ADD" is displayed
in purple indicating that the channel has
been memorized.
TV_CAgLE: ,TV CABLE
CH PROGRAM
ADD!ERASE:,AO0 ERASE
CH LOCK: 0 0 0 0
LANGUAGE: ,ENGLISH FRENCH
SPANISH
TO SELECT ITEM PUSH AOV
TO 03NTROL PUSN - +
4 Repeat steps 1 to 3 for other channels.
You have now completed the channel programming.
.q
To Next Page
Loading...
