Programming Channel Memory (Continued)
CHANNEL •/•
/
MENU W/VIDEO VO!JJM_ ['_ POWER
MENU </1_ _'/•
•/•
RECALL(_ MUTEly) _R
0®0
O00
-- Channel
Number
NU
After performing the CH PROGRAM function, you can add or erase
specific cha .nn.els.
1 Select the channel you want to erase using the CHANNEL • or •
button, or select the channel you want to add using the Channel
Number buttons.
2
Press MENU repeatedly until the Setup
menu is displayed on the screen.
3 Press • or • until "ADD/ERASE" is
displayed in purple.
r
AgD/ERASE: [ADDIERASE
TO SELECT ITEM PUSH • •
TO CONTROL PUSH <
4 Press < or I_:
To erase the channel
Press the button until "ERASE" is dis-
played in purple indicating that the
channel has been erased from the
memory.
To add the channel
Press the button until "ADD" is displayed
in purple indicating that the channel has
been memorized.
_i! LO_K
TO SELECT ITEM PUSH • •
TO C_WTROL PUSH _ I_
5 Repeat steps 1 to 4 for other channels.
You have now completed the channel programming.
CABLE channel reference chart
Correspond-
ing CABLE
channel
ing CABLE
channel
A-8 5(A-7) 6(A-6) A B C ..................U V W AA BE]..................XX YY 77 AAA BBB 65 66
67 68 69 ..................92 93 94 A-5 A-4 A-3 A-2 A-1 100 101 102 ..................123 124
The above chart is typical of many cable system channel allocations. If in doubt, consult your cable company.
16
To Next Page
Loading...
