Toshiba CF27H50 - Audio Broadcast Features; Stereo and SAP Broadcast Selection; Surround Sound Effect

MENU TVNIDEO VOLUME CHANNEL
MENU </l•/•1•
POWER
RECALLG MUTE@ _R
®®®
®,@@
®@@
@@c@o
REC TV/VCR STOP PLAY
STILL SOURCE PiP
SLOW PAUSE REW FF
LOCATE SWAP
TOSHIBA
JND
Notes:
• When the TV receives a MTS broadcast,
the word "STEREO" or "SAP" is
displayed on the screen whenever the "IV
is turned on, a channel is selected, or the
RECALL button is pressed.
I TEREO ]
SAP
• Tl"reMTS function does not operate in
the VIDEO mode.
•- n
The MTS (Multi-channel TV Sound) feature allows you to improve your
TV viewing with high fidelity stereo sound,
This TV also allows you to activate or deactivate the stereo surround
sound effect.
MTS also provides for an extra channel, SAP (Second Audio Program),
used to transmit a second language or other audio information.
2
Press MENU repeatedly until the Audio
menu is displayed on the screen.
Press • or • until "MTS" is displayed in
purple.
The usable selections will be displayed in
yellow.
i I
MTS: STR SAP [MONO }
SASS ....... I ........
SPEt,_,EF S : O?i, OFF
TO SELECT ITEM PUSH • •
TO CONTROL PUSH ,4 •
3
Press 4 or _ to select "STR" or "SAP".
Normally this function can be left in
"STR" mode. Your TV will then automati-
cally reproduce either stereo or
monaural sound, whichever is broadcast.
If the stereo sound is noisy
Be sure you have selected "STR" mode if broadcast is in stereo. How-
ever, if a broadcast signal is not strong enough, and noise-free stereo
sound is not available, select "MONO" (monaural) mode.
The noise should be reduced.
The Surround function expands the audio listening field wider and
deeper than you would believe possible from a TV's speakers. This
function processes stereo signals from a TV broadcast or VIDEO input.
1
2
Select the STEREO mode as described
above.
Press SURROUND until "SURROUND
ON" is displayed in purple.
The surround function hasnow been
activated.
SURROUND ON
SURROUND OFF
TO SELECT PUSH SUR
To deactivate the surround effect
Select "SURROUND OFF" in step 2 above.
Note: Normally you can leave the "STR" mode turned on and the
surround function activated. The TV will automatically produce
either surround stereo or monaural, whatever is broadcast.
1
"o
r.
=
o
U)
o
r-
C
,i
"o
<
23