Toshiba CF32H50 - Convenient Remote Functions

Convenient Remote Functions
000
O0
FAV CH WNIDEC
r-ri r-rl r-gi
REC TVNCR STOP PLAY
r-_ (_3 r-_ EZ3
STILL SOURCE PiP
SLOW PAUSE REW FF
LOCATE SWAP
TOSHIBA
RECALL
MUTE
Channel
Number
CH RTN
Press RECALL to display the following on-
screen information.
• Channel number
• VIDEO mode selected
• Stereo or SAP audio status
STEREO
SAP
TV
Press MUTE to mute the sound. The word
"MUTE" will be displayed on the screen as
shown. This is useful during telephone calls
or other interruptions.
To restore the sound, press MUTE again.
Note: When the MUTE button is pressed,
the Closed-Captioned feature "C1" is
activated. ("MUTE" on-screen display
will disappear.) To deactivate, press
the MUTE button again. (This feature
only functions when the Closed
Caption mode is set to "OFF".)
MUTE
Press CH RTN to return to thelast channel viewed.
This is useful should you want to view two channels. This allows you to
view two programs without entering an actual channel number each
time.
To operate this function
1 Seleqt the first channel you want to view.
2
3
Select the other channel with the Channel
Number buttons.
Press CH RTN.
The previous channel will return.
Each time you press CH RTN, the TV will
switch back and forth between the two
channels.
|
Vewingchanneti4
t
(Previous channel)
18