Toshiba D-KVR20U - VIDEO INPUT SETTINGS CONFIGURATION; Configuring Video Input Sources for Recording

20 EN20 EN
SETTINGS FOR THE VIDEO INPUT
You must let the unit know which video input jack you are using before making a recording.
1
Press [SETUP].
2
Use [K / L] to select “General
Setting”, then press [ENTER].
3
Use [K / L] to select “Video”, then
press [ENTER].
4
Use [K / L] to select “Select Video”,
then press [ENTER].
5
Use [K / L] to select the input jack
type to connect, then press [ENTER].
If you want to use VIDEO IN jack, select “Video
In”.
If you want to use S-VIDEO IN jack, select
“S-Video In”.
General Setting
Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All
Progressive
TV Aspect
Select Video
Select Video - L1 (Rear)
Video In
S-Video In
6
Press [SETUP] to exit.
SE-R0295
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
SAT.LINK
JKL MNO
DEF
TRACKING
ENTER
INSTANT
SKIP
PLAY
DVDVCR
PAU S E
REV
SKIP
STOP SKIP
FWD
1.3x/0.8x
PLAY
TIME SLIP
TIMER SET ZOOMSEARCHREPEAT
RECREC MODEDUBBING
ENTER
SETUP
E9KGBUD_D-KVR20KU_EN.indd 20E9KGBUD_D-KVR20KU_EN.indd 20 2008/05/27 16:10:172008/05/27 16:10:17