Toshiba D-R160SB - Sound Mode Selection

Recording
Playback EditingIntroduction Connections
Basic Setup
Function Setup Others
41EN
Recording Audio Select (XP)
Selecting the Sound mode
3) Select “Recording Audio Select (XP)” using
[K / L], then press [ENTER].
Option window will appear.
4) Select “PCM” or “Dolby Digital” using [K / L],
then press [ENTER].
“Dolby Digital” is selected as a default.
PCM:
Records PCM audio for the best quality sound.
Dolby Digital:
Records Dolby Digital audio for good quality sound.
5) Press [SETUP] to exit.
Notes
• “PCM” stands for Pulse Code Modulation. It changes
analogue sound to digital sound without compressing
audio data.
• When the recording mode is set to other than XP, the unit
records “Dolby Digital” audio automatically even if you
selected “PCM”.
You can enjoy high quality sound recording. This
function works only when the recording mode is set to
XP.
1) Press [SETUP].
2) Select “Recording” using [K / L], then press
[ENTER].
Recording menu will appear.
Setup
Playback
Display
Recording
Clock
Channel
Disc
Required Setting
Recording
Auto Finalise
Satellite Link
Bilingual Recording Audio
External Input Audio
Auto Chapter
OFF
10 minutes
Main
Stereo
Recording Audio Select (XP)
Dolby Digital
PCM
Dolby Digital
Recording Audio Select (XP)
This unit can receive bilingual broadcasts.
You can switch between modes by pressing [AUDIO] on
the remote control. Each mode is indicated on the TV
screen as follows.
• During reception of bilingual broadcasts
Mode Audio output
Display on the
TV screen
Main
Main audio from both
speakers
Main
Sub
Sub audio from both
speakers
Sub
Main / Sub
• Main audio from the
left speaker
• Sub audio from the
right speaker
Main / Sub
05RecordingBD.indd4105RecordingBD.indd41 2006/02/2418:03:032006/02/2418:03:03