47
EN
Introduction Connections Basic Setup Playback
Editing
VCR Functions Others
Function Setup
Recording
PBC Function for Video CDs
This unit conforms to ver.1.1 and ver.2.0 of the Video
CD standard playback control (PBC) function. This
enables you to play back interactive software using
menu screens. Refer to the information
accompanying the Video CD.
Ver.1.1 (without PBC function): You can still enjoy
playback of pictures and music from the CD.
Ver.2.0 (with PBC function): “Pbc” will appear on the
screen and display when playing back a Video CD
with the PBC function.
Hint
• When playing back Video CDs with the PBC
function, “Pbc” is displayed instead of the playing
back time and current track indications on the front
panel display.
Note
• Some operations cannot be performed unless the
function is cancelled either automatically or
intentionally by you.
• Operations that are not available when the PBC
function is set to “ON” are indicated by the following
symbol in this manual:
Playing Back a Video CD Using the
Title Menu
1 When playing back a Video CD with
the PBC function, the Title menu will
appear automatically.
2 Press [the Number buttons] to select
the desired title.
Playback will start at the selected title.
3 Press [RETURN] to go back to the
Title menu.
Note
• While the On-Screen Display appears, you cannot
perform steps 2 and 3.
Cancelling and Recalling the PBC
Function
Insert a Video CD.
1 In stop mode, press [SETUP].
2 Select “CD Playback Mode” using
[U / D], then press [ENTER].
3 Select “PBC (Video CD only)” using
[U / D], then press [ENTER].
4 Select “OFF” using [U / D], then
press [ENTER].
5 Press [SETUP] to exit.
To recall the PBC function, select “ON” at step 4
above.
Note
• The default setting of “PBC (Video CD only)” is
“ON”.
VCDVCD
VCD
To Next Page
Loading...
Need help?
General
