Call Pickup
1. Press an extension button.
2. Enter a code from the following list:
Group Pickup:
#5#34
or
________
Directed Terminal Pickup:
#5#5 + EXTN No
or
________
Other (see System Administrator):_________
Paging
➤
To make a page announcement to a phone or external
speakers
1. Press extension, lift the handset, and enter:
#30
or
________
(all groups)
..or
#31
or
________
+ _____ the Group page
access code. See “Flexible Buttons” for more
paging codes.
2. Make your announcement, then hang up.
➤
To make an All Call Page
1. With the handset off-hook, press
All Call Page
...or extension +
#30
. This pages all phones in the
All Call Page Group, and may page external speakers
(depends on programming).
2. Make your announcement then hang up.
Redial
Use this button to redial the last number dialed from your phone.
³
To redial the last number, press
Redial
or
*
0
.
Speed Dial
➤
To store a Station Speed Dial Number
We suggest storing Speed Dial numbers on a One Touch
button; use Speed Dial Codes to store more numbers.
1. Press
Program
or dial
#9876
.
2. Press
Spdial
.
3. Press
1
, then enter a Speed Dial Code (
00~99
).
4. Enter the number to be stored in the Speed Dial bin
(32 digits max.).
5. Press
Spdial
to store the entry.
See “DATA PROGRAMMED.”
6. Lift and replace the handset.
➤
To clear a number from a Station Speed Dial code
³
Repeat the previous procedure skipping Step 4.
➤
To make a call using Speed Dial
1. Lift the handset.
2. Access a outside line (if necessary).
3. Press
Spdial
. Then dial the Station or System Speed
Dial Number.
(1 + 00 ~ 99)
One Touch Buttons
This feature is useful for storing frequently dialled numbers.
➤
To change a One Touch Button
1. Press
#9876
to enter User Programming Mode.
2. Press the One Touch button to set.
3. Enter the digits or special buttons to be stored.
4. Press the One Touch button to save the entry.
If these steps do not work, you may have to create a One
Touch button (see “Flexible Buttons”).
➤
To Use a One Touch Button, just press it.
Voice Mail - Direct Transfer
1. While on a call, press
Cnf/Trn
.
2. Press
#407
____.
3. Enter the voice mailbox number (may be the same as the
extension number), then press
#
.
4. Hang up (the caller is connected to the voice mailbox) or
press
Cnf/Trn
to return to the calling party.
Volume Control
➤
To adjust handset volume
³
During a call, press down
Vol
▲
or
▼
. When you hang
up, volume returns to default.
➤
To adjust the speaker volume for internal/external calls
and background music
³
Press
Spkr
. Select a line and press
Vol
▲
or
▼
.
➤
To adjust Ring Tone, Handsfree Answerback and
Speaker Off-hook Call Announce
³
With an idle phone and handset on-hook, press
Vol
▲
or
▼
. When you hang up, volume returns to default.
DKT3014-SDL LCD Features
➤
To use Speed Dial or Directory Menus
1. Press the Soft Key
next to the Speed Dial
(SD) or Directory (DIR) to
view the first screen.
2. To view the other
pages, press the soft
keys MORE or
PREVIOUS ...or
LEFT or RIGHT.
3. Select someone from the list by pressing the Soft Key
next to the name.
➤
To Use Direct Station Selection
1. Press the DIRECT SS
Soft Key to view the
first screen.
2. To view other pages,
press the MORE or
PREVIOUS Soft Keys.
3. To select someone from
the list, press the Soft Key
next to the name.
Flexible Buttons
There are 10, 14 or 20 Flexible Buttons on your telephone. You
can program features onto Flexible Buttons for easy access.
1. Press
#9876
to enter User Programming Mode.
2. Press
Hold
.
3. Press the Flexible Button to set or change.
4. Enter the Flexible Button Code (see following list).
5. Press the same Flexible Button (flashing). “DATA
PROGRAMMED” appears on your LCD.
FRED J NO. 3371
MAR 18 MONDAY 01:35
DIRECT SS
SYSTEM SD
PERSONAL SD
EXTERNAL DIR
INTERNAL DIR
FRED J NO. 3371
MAR 18 MONDAY 01:35
BOB T
DON U
CAROL F CUST SERV
FRED GRAY W
PREVIOUS TECH DEPT
EXIT MORE
CALLING
BOB T NO. 3200
Flexible Button Codes
Account Code
660
Auto Busy Redial
150
Auto Callback
160
Call Forward - Any Calls (Internal and External)
All Call 340
Busy 350
No Answer 360
Busy No Answer 370
Call Park Orbit
170
Call Pickup
Incoming - Group Pickup 430
Incoming - Directed Terminal Pickup 440
Incoming - Directed Group Pickup 450
Incoming - Directed DN Pickup 460
On hold - Local Retrieve 490
On hold - Remote Retrieve 500
On hold - Outside Line Retrieve 480
On hold - Directed DN Retrieve 510
Incoming - Any External Call 470
On hold and Incoming 520
Caller ID
590
Cancel
290
Do Not Disturb
180
Door Lock Cancel
540
Direct Station Selection (DSS) Button
610
One Touch Button
570
Paging
Page All Groups 220
Page Individual Groups 230
Emergency Page - Individual Group 250
Emergency Page - All Groups 240
Answer - Group Page 590
Record to VM
630
Pause/Resume 640
Release Button
270
Release/Answer
280
Speed Dial
260
User Programming Mode
650
Note Not all features have a Flexible Button Code. For
additional codes, see your System Administrator.
To Previous Page
Loading...
Need help?
General