Do you have a question about the Toshiba DP5122-SD and is the answer not in the manual?
Power over Ethernet | Yes |
---|---|
Headset Port | Yes |
Networking | IPv4 |
Audio Codec Support | G.711, G.729 |
Speakerphone | Yes |
Protocols | SIP, RTP, RTCP |
Power | PoE or AC adapter |
Operating Temperature | 0°C to 40°C |
Ethernet Ports | 2 x 10/100Base-T |
Describes the sleek, low-profile design, black body, metallic silver tilt stand, and traditional keypad layout.
Details the 24-character wide LCDs and the number of lines available for call information on specific models.
Covers integrated LCD key-strips on specific models and add-on modules, and their programmability.
Explains availability, placement benefits, and adjustable settings for the backlit LCD feature.
Details the simultaneous muting of microphone and handset and the function of the MIC key.
Lists other key features like high-contrast LCD, stylish tilt stand, and built-in headset interface.
Details the various tilt positions available for DP5000 series phones, including stand extensions and wall mounting.
Specifies the acceptable temperature and humidity ranges for storing and operating the DP5000 series telephones.
Outlines the necessary CIX Basic Port License and specific migration license for certain models.
Covers standard wiring, cable requirements, and connection points for DP5000 series telephones and ADMs.
Provides maximum line length specifications for different DP5000 models with CIX100/200/670 systems based on wiring.
Details maximum line lengths for DP5000 models with CIX40 systems, noting wiring requirements and OCA limitations.
Lists the -24 VDC power factor for various DP5000 telephone models and add-on modules.
Identifies the various connectors on DP5000 series telephones using icons and provides guidance on cable routing.
Explains the procedure for wall mounting DP5000 series telephones, including specific steps for the DP5008.
Guides users on assigning and programming keystrip labels for the DP5130-SDL model using eManager.
Provides instructions for assigning and programming keystrip labels for the LM5110 add-on module via eManager.
Details how to adjust handset and speaker volume for internal/external calls and background music.
Specific instructions for adjusting handset and speaker volume for the DP5008 model.
Explains how to adjust LCD contrast on DP5100 models and LM5110 using specific key presses.
Describes the function of the Mic/Mute key for muting the microphone and handset during calls.
Provides steps to program custom labels for keys on DP5130-SDL and LM5110 models.