Do you have a question about the Toshiba DP5132-SD and is the answer not in the manual?
Sleek profile, black body, metallic tilt stand, traditional keypad layout.
LCDs are 24 characters wide, offering 4 or 9 lines of display for call information.
Integrated in DP5130-SDL and LM5110, with programmable keys and user-selectable labels.
Available on specific models, allows placement in low-light environments, adjustable backlight settings.
All models have mic/speaker. Enhanced mute mutes handset and microphone simultaneously.
High contrast LCD, stylish tilt stand, built-in headset interface, carbon handset interface.
DP5000 series require CIX Basic Port License; DP5022-SDM requires a specific migration license.
Guides on assigning keystrip label resources and programming labels for DP5130-SDL using eManager.
Explains how to adjust handset volume, speaker volume, and ring tone on DP5000 series telephones.
Details volume adjustment procedures specifically for the DP5008 telephone model.
Provides instructions for adjusting LCD contrast on DP5100-model telephones and the LM5110 module.
Explains the Mic/Mute key function, which mutes both the microphone and handset simultaneously.
Step-by-step guide to program LCD keystrip labels for DP5130-SDL & LM5110 using dial codes.