Toshiba DVS32-240-2T - Activate PTZ Preset on Sensor

46
Activate PTZ Preset on Sensor
1. Create a PTZ Preset Position. See instructions in the PTZ Setup chapter.
2. Click Setup on the Display screen.
3. Click Sensor.
4. Click Sensor Preset.
5. Select the desired camera from the Channel list.
6. Select the appropriate Sensor from the list.
7. Select the preconfigured PTZ Preset from the list.
8. Click Set. A list of configured Sensor Presets will display in the
box below.
9. Repeat for additional sensors.
10. Click OK to close the Sensor Preset window.