Toshiba e-Studio 1207 - Detailed Optional Units; Finisher and Folding Unit Details; High Capacity Stacker and Inserter Details

30
High Capacity Stacker
Stacks a large number of sheets in the stacker tray of the paper cart, enabling you
to move the stacker tray on the stacker cart. This stacker provides an LED that
noties users of the status. You can connect up to two large capacity stackers.
High Capacity Stacker
MX-ST10
PAPER CART
MX-CA10
Inserter
Inserts a sheet of paper into a specic page as an insertion sheet.
Inserter
MX-CF11
• 200 sheets x 2
Folding Unit
Each set of copies can be folded.
Folding Unit
MX-FD10
• Half Fold
• Z-Fold
• C-Fold
• Accordion Fold
• Double Fold
Finisher/Saddle Stitch Finisher
Each set of copies can be stapled, or the sheets can be folded and stapled.
Installing a punch module automatically enables hole punching that is convenient
for ling.
Finisher
MX-FN24
Finisher
MX-FN21
• e-STUDIO907 only
• 50 sheets
• 100 sheets
Saddle Stitch Finisher
MX-FN25
Saddle Stitch Finisher
MX-FN22
• e-STUDIO907 only
• 50 sheets
• 15 sheet (saddle stitch nisher)
• 100 sheets
• 20 sheets (saddle stitch
nisher)
• For saddle folding, it trims a
side drop, offering a good-
looking output image (In use of
trimming module).
OPTIONS