Toshiba e-STUDIO 161 - [14] Option MY-1022 (250 sheets paper feed unit); F. Paper Feed Roller Clutch; G. Paper Feed Roller; 7. Maintenance

MY-1022 OPTION MY-1022 (250 sheets paper feed unit)
14 – 9
F. PAPER FEED ROLLER CLUTCH
Note: When asembling the paper feed roller cluch, fit and insert section
A (D cut) into the shaft as shown in the figure.
G. PAPER FEED ROLLER
*Be sure to rotate this part 180 degrees(It turns upward) after attach-
ment.
7. MAINTENANCE
*1 : Replace = 150K
Note: For disassembly and assembly of the paper feed roller and the
transport roller, refer to [6] DISASSEMBLY AND ASSEMBLY.
3
A
1
2
No. Name Work item
When
service call
Remark
1 Paper feed roller PA ass’y *1 Cleaning o
2 Transport roller Cleaning o
1
2
1
2