Toshiba e-STUDIO 163 - Page 83

December 2005 © TOSHIBA TEC e-STUDIO163/203 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 65
2
Pressure roller 1250-0 to 8 1251 <Default values of code 1250
(e-STUDIO 163/203)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Fuser roller separation
finger
1268-0 to 8 1269 <Default values of code 1268
(e-STUDIO 163/203)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Pickup roller (ADF) 1282-0,1,2,8 1283 <Default values of code 1282
(e-STUDIO 163/203)>
Sub-codes 0, 2, 8: 0/0
Sub-code 1: 120,000/120,000
Feed roller (ADF) 1284-0,1,2,8 1285 <Default values of code 1284
(e-STUDIO 163/203)>
Sub-codes 0, 2, 8: 0/0
Sub-code 1: 120,000/120,000
Separation roller (ADF) 1286-0,1,2,8 1287 <Default values of code 1286
(e-STUDIO 163/203)>
Sub-codes 0, 2, 8: 0/0
Sub-code 1: 120,000/120,000
Feed roller
(Drawer)
1298-0,1,2,8 1299 <Default values of code 1298
(e-STUDIO 163/203)>
Sub-codes 0, 2, 8: 0/0
Sub-code 1: 80,000/80,000
Feed roller
(PFU)
1300-0,1,2,8 1301 <Default values of code 1300
(e-STUDIO 163/203)>
Sub-codes 0, 2, 8: 0/0
Sub-code 1: 80,000/80,000
Separation roller
(Bypass unit)
1316-0,1,2,8 1317 <Default values of code 1316
(e-STUDIO 163/203)>
Sub-codes 0, 2, 8: 0/0
Sub-code 1: 80,000/80,000
Feed roller
(Bypass unit)
1324-0,1,2,8 1325 <Default values of code 1324
(e-STUDIO 163/203>
Sub-codes 0, 2, 8: 0/0
Sub-code 1: 80,000/80,000
Pickup roller
(Bypass unit)
1332-0,1,2,8 1333 <Default values of code 1332
(e-STUDIO 163/203)>
Sub-codes 0, 2, 8: 0/0
Sub-code 1: 80,000/80,000
Recovery blade 1336-0 to 8 1337 <Default values of code 1336
(e-STUDIO 163/203)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Items
PM management set-
ting <Procedure 4>
*Indicated in 8 digits
Date of previous
replacement
<Procedure 2>
Remarks