5 CHANGING EQUIPMENT’S SETTINGS
148 Department Code
Deleting department codes
This section describes how to delete the department codes already registered. Key in the mas-
ter code in the department code entry screen, and then proceed to the following steps:
1
Press the [USER FUNCTIONS] button.
The “user functions mode” main screen is displayed.
2
Select “DEFAULT SETTINGS” with and buttons, and then
press the [ENTER] button.
3
Select “GENERAL SETTINGS” with and buttons, and then
press the [ENTER] button.
4
Select “DEPARTMENT CODE” with and buttons, and then
press the [ENTER] button.
USER FUNCTIONS
1216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
DEFAULT SETTINGS
01.GENERAL SETTINGS
02.COPY SETUP
03.FAX SETUP
GENERAL SETTINGS
04.WEEKLY TIMER
05.SPEAKER VOLUME
06.DEPARTMENT CODE
To Next Page
Loading...
