Toshiba E studio 2010C - Replacing Staple Cartridge

Chapter 3 MAINTENANCE
40
2
1
1
Lift up the control panel, and open the front cover
of the Finisher.
2
1
2
Holding the lever, move the nisher to the left
until it comes to a stop.
2
1
3
Open the Hole Punch Unit while pushing the
lever.
4
Take o the staple cartridge.
5
Push the buttons of both side of the cartridge to
take o the staple case.
6
Install a new staple case.
Stapler Unit of Inner Finisher