1
2
3
4
5
User management
Users of the equipment can be limited and the available functions and past record of each user can be controlled by
using the user management function. When the equipment is managed under this function, turn the power ON and
enter the information required (e.g. user name, password). The menu for entering user information also appears when
you press the [ACCESS] button on the control panel or automatic function clear has worked. Enter the information
according to the procedure below.
When Department or User Management is Used
MFP local authentication
Windows Domain Authentication
LDAP Authentication
Tip
If a guest user is enabled in the user management, the [GUEST] button is displayed on the touch panel. Press [GUEST] to login as a
guest user. For the types of functions available, consult the administrator.
27
To Next Page
Loading...
