e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
iv
Table of Contents
5.3 To Clearly Scan and Print an Original in Black and White (To improve
gradation and reduce graininess).........................................................5-5
5.4 To Scan the Original, while Reducing the File Size ......................................5-6
5.4.1 To Reduce the File Size by Changing the Options when Scanning the
Original..................................................................................................5-7
5.4.2 To Reduce the File Size in Slim PDF ...........................................................5-10
5.5 To Sharply Scan the Original (To increase the sharpness intensity) ..........5-12
5.6 To Scan an Original, while Enhancing Black ..............................................5-14
5.7 To Scan an Original with the Desired Gradation.........................................5-16
5.8
To Register the Original Mode Optimal for a Particular Type of Original
(To have
"Custom" selected) ............................................................................5-18
6. Printer-specific Adjustments (GA-1211)
6.1 To Maintain a Steady Color Balance (Calibration)........................................6-1
6.1.1 To Check Calibration History..........................................................................6-2
6.1.2 Types of Calibration and Their Order .............................................................6-4
6.1.3 To Calibrate for Thick 2/3/4 (Default Output Profiles and Calibration Sets) ...6-8
6.1.4 Confirmation of Calibration Result................................................................6-13
6.1.5 To Calibrate Measurement Page (Target) in Both Directions.......................6-19
6.2
To Use Different Profile for Each Media When Media Types are Mixed
.................6-22
6.3 To Print in Desired Color Balance (How to Use Color Editor).....................6-25
6.4 To Print with Profile Attached to Image.......................................................6-30
6.4 To Print with Profile Attached to Image.......................................................6-31
6.5 To Adjust Tone of Gray or Black Area ........................................................6-33
6.5.1 To Print Gray Areas Only with K Toner ........................................................6-34
6.5.2 To Adjust Tone of Black Areas on Text or Line Arts.....................................6-36
6.6 To Make Low-Resolution Images Look Smoother ......................................6-38
6.7 To Suppress Moiré or Jagginess on Photographs......................................6-40
6.8 To Adjust Sharpness...................................................................................6-42
6.8.1 To Adjust Sharpness Level of Image............................................................6-43
6.8.2 To Change Default Setting of Sharpness Level............................................6-44
To Next Page
Loading...
Need help?
General
