To Next Page
L
Luis AlvaradoAug 16, 2025
How to change banner page output tray on Toshiba Printer?
- CcoxkathrynAug 16, 2025
To change the output tray for banner pages on your Toshiba Printer, adjust the tray setting for "Raw jobs - Default Output Tray".
How to change banner page output tray on Toshiba Printer?
To change the output tray for banner pages on your Toshiba Printer, adjust the tray setting for "Raw jobs - Default Output Tray".
What to do if network or touch panel display disabled after LDAP search on Toshiba Printer?
If the network or touch panel display is disabled after an LDAP search on your Toshiba Printer, ensure you have entered the correct LDAP settings. Pay close attention to re-entering the password correctly, as it is displayed with asterisks.
How to fix black lines on Toshiba e-STUDIO 200L All in One Printer images?
If you are seeing black lines in the images sent from your Toshiba All in One Printer, clean the scanning area of the Reversing Automatic Document Feeder with a soft cloth. This should resolve the issue.
What to do if Toshiba e-STUDIO 200L All in One Printer shows communication error?
If your Toshiba All in One Printer displays a communication error, retry communications. This may resolve the issue.
How to fix memory overflow on Toshiba e-STUDIO 200L?
If your Toshiba All in One Printer displays a memory overflow error when scanning documents, the memory has overflowed. You can either wait for the memory to clear, or check the jobs and delete reserved jobs to clear memory.
What to do if Toshiba All in One Printer shows 'Too Many Tel # Digits'?
If your Toshiba All in One Printer displays a 'Too Many Tel # Digits' error, it means that 128 digits or more were registered for a chain dial communication. Confirm the number of digits dialed and register the numbers again.
What to do if Toshiba All in One Printer job reservation is full?
If your Toshiba All in One Printer indicates that the job reservation is full, it means the number of reserved jobs has exceeded 100. You can either wait for job reservations to be completed, or check the jobs and delete reserved jobs.
What to do if Toshiba e-STUDIO 200L job memory is full?
If your Toshiba All in One Printer displays a 'job memory full' error, it means that the total number of destinations for outgoing call jobs exceeded 1,000. Either wait for outgoing call jobs to be completed, or check the jobs and delete reserved jobs.
What does 'Not allowed now' mean on Toshiba e-STUDIO 200L All in One Printer?
If your Toshiba All in One Printer displays a 'Not allowed now' message, it means that further polling transmission reservation was attempted even though polling transmission was already reserved. Either wait for polling transmission jobs to be completed, or check the jobs and delete reserved jobs.
What does 'Sorry not possible' mean on Toshiba All in One Printer?
If your Toshiba All in One Printer displays a 'Sorry not possible' message, it means that on-hook or direct TX was attempted during communications. Wait for communications to end and retry communications.
General| Functions | Print, Copy, Scan |
|---|---|
| Type | Monochrome Laser |
| Print Speed | 20 ppm |
| Scan Resolution | 600 x 600 dpi |
| Copy Speed | 20 cpm |
| Copy Resolution | 600 x 600 dpi |
| Interface | USB 2.0 |
| Maximum Paper Size | A4 |
| Display | LCD |
| Print Resolution | 2400 x 600 dpi |
| Connectivity | USB |
| Paper Capacity | 250 sheets |
| Paper Size | A4, A5, Legal, Letter, B5 |
