26 Network Administrator’s Guide — Setup Flow for Printing Features
• TopAccessDocMon
• Agfa Font Manager
NOTE: • TopAccessDocMon is available only when the client computers are connected to
this equipment within the same local area network. Also TopAccessDocMon cannot
automatically find the IP or IPX address of this equipment to connect, if users install
the client software for IPP printing. In that case, users must find the equipment in
the network using the Network Discovery feature. For more information about
TopAccessDocMon, see the Printing Guide.
Setup Flow for Printing via Windows Print Server
When you want to manage all print jobs in the print server instead of directly printing to this
equipment, the Windows Client Server network solution is helpful. In this case, an administrator
sets up the sharing printer using LPR in Windows NT 4.0, Windows 2000, Windows XP, or Win-
dows Server 2003 print server. Then clients can install the printer driver from the Windows print
server using SMB.
Setup procedure
Step 1: Setting up this equipment for LPR printing.
Please see the setup flow for LPR printing.
P.22 "Setup Flow for LPR Printing"
NOTE: • When installing the printer driver in the server to set up the sharing printer, install the
printer driver by the Add Printer Wizard. Do not install the printer driver using the
installer.
Step 2: Setting up the Windows print server.
P.169 "Setting up Windows Print Server"
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Connecting to Client Server type of Microsoft network
Setting up
the LPR connection
Setting up the SMB
printer connection
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
To Next Page
Loading...
