Network Administrator’s Guide — Setup Flow for Fax Features 41
Step 3: Setting up the SMTP Network Service.
You should specify the SMTP server to be used for sending an Internet Fax.
P.59 "Setting up the SMTP Client"
Step 4: Setting the Internet Fax Settings.
In the Email Settings, you should specify the from address and from name to enable the
Internet Fax transmission. Also you can specify the fragment size, and body text that apply
to the Internet Faxes sent from this equipment.
P.84 "Setting up the Internet Fax Settings"
Step 5: Setting up the Fax Settings.
Set the Fax device settings to enable the facsimile transmission from this equipment. This is
available only when the optional Fax unit is installed. Please see the User Functions Guide
to configure the Fax Settings from the Touch Panel Display, or from TopAccess.
P.70 "Setting up the Fax Settings"
Step 6: Registering the Relay Box with Email addresses.
The registration of the Relay Box can be done by users. Please see the Operator’s Manual
for Facsimile Function to register the relay boxes from the Touch Panel Display, or see the
Network Operator’s Guide to register the relay boxes from TopAccess.
Setup Flow for Offramp Gateway
This equipment can be used as a Hub Station to forward Emails — from your client computer or
Internet Fax device — to any facsimile on the public switched telephone network.
For example, the document can be sent to this equipment from out of the country through the
Internet, then the document can be sent from this equipment to the designated fax number
through the local public telephone line.
For e-STUDIO4511 Series:
The Offramp Gateway feature is available only when the optional Fax unit is installed.
For e-STUIO450 Series and e-STUDIO280 Series:
The Offramp Gateway feature is available only when the optional Fax unit, Printer Kit, and
Scanner Upgrade Kit are installed, or when the optional Fax unit and Printer/Scanner Kit are
installed.
To Next Page
Loading...
